Hammer Drill

For masonry work, this hammer drill can be used for drilling metal and wood as well as other similar materials and for percussion drilling of concrete and similar materials. It is a versatile tool that lies between a drill and a demolition hammer. With its chiseling function, it’s the ideal power tool for demolishing a wall, drilling into the ground, or removing tiles. The specific percussion system provides the necessary power to drill large diameter holes (over 20 mm). Very useful for passing cables or piping at your job site, for example.

Thanks to its impact, it can perforate very hard materials (concrete, stone, granite, reinforced concrete, hard stone), depending on the chosen mode:
- Percussion with rotation: for drilling.
- Drilling without rotation: for chiseling (demolition, removing tiles or paving).

No-load speed: 800 rpm
Impact frequency: 4,000 bpm
Impact force: 5 joules
Chiseling function
Drilling capacity: 40 mm in wood, 32 mm in concrete, and 13 mm in metal
Supplied with a keyed chuck, 3 drill bits, and 2 chisels
Power: 1500W

Safety instructions: always wear safety goggles, hearing protection, a dust mask, and protective gloves.